How to measure your transom angle

Place a carpenter's square with the long side ( 22 1/2" ) against the keel. When the short side ( 14" ) comes in contact with the transom, take the measurement ( see the sketch below ) between the inside corner of the square and the boat bottom. Each 1/4" is equal to 1 degree in slope of the transom.

                                                                     Inside Measurement

Transom Thickness ( 2" minimum recommended )     _______________

Transom Width           _______________

Transom Curvature     _______________

Transom Angle           _______________

Back to Combination Kits Page